GIPL offers air amplifying compressed air saving blow guns and nozzles, which are handy, low cost air amplifiers. Air amplifying blow guns and nozzles consumes very little compressed air to deliver high volumes of blow air. Air is amplified using "COANDA EFFECT". Blow and thrust of blown air can be infinitely controllable by regulating pressure.
eX Blow Gun Ergonomically designed blow gun, housed in tough and durable engineering plastic to reduce operator fatigue and noise levels. Its wide and high thrust blow reduces operation time.
With 7 times air amplification, eX Blow Gun saves considerable amount of compressed air, thereby reducing input cost, maintenance of air compressor, efficient utilization of resources.
Real Blow Nozzles are economical and efficient way to reduce air consumption of compressed air upto 1/25th. It can be fitted on existing setup without any modifications. It can be mounted as well as used as handy blow gun.
They are safe as it meets COSHH dead end pressure limits.
MORE DETAIL
Real Blow Pipes are factory set air amplifying blow nozzles made out of stainless steel. They are ideal where moderate to low thrust is required, Real Blow pipes can pay you back within hours of purchase. Real Blow pipes can also be fitted on triggered blow gun.
They are safe as it meets COSHH dead end pressure limits.
MORE DETAIL
Real Blow Jets are air amplifying blow jets made out of SS. They are ideal replacement to open copper / steel pipes. Because of very high thrust, they still offers 2-4 times air amplification. It can be fitted on blow guns or slide valves.
Noise level of these jets does not meet COSHH norms. However they meet safety norms.
Ergonoic Blow Guns are made from tough engineering plastics to give very long life. Brass insert in inlet ensures leak proof connection and triggered lever reduces operator fatigue.
Can adopt any of our compressed air saving nozzles and blow pipes.
This is enhanced and larger version of Air AMplifying High Thrust Nozzle. These nozzles finds application where thrust required is very high along with air saving. Replacing open pipe with these nozzle results in substantial savings of compreessed air.
Supplied with ball valve or slide valves. Air consumption : 37 CFM Thrust @ 300 mm : 1500 grams
