ABOUT US
PRODUCTS
DOWNLOAD
CONTACT US
FEEDBACK
HOME
PRODUCT CATOGORIES
Specifications General
MOC
FOR MORE INFORMATION CONTACT US :
3711/A,GIDC,PHASE-IV,vatva
,
Ahmedabad-382445.
Phone:
+91-79-25842503
,
+91-79-2584 0845,
Email:
info@giplindia.com
Home
»
Water Valve
»
For Appliences
»
Specification For Model 2E5FG
»
Specification General
Specifications for water inlet Solenoid Valves
All water feed solenoid valves are made to meet international standards like VDE 0730, UL 8730, EN etc. For MOC (Material of construction)
click here
.
Sr.No
PARAMETER
DESCRIPTION
1.
Connector
Horizontal Spade, 6.3 x 0.8 mm
2.
Electric Rating
G Series:
12 V DC / 24 V AC / 110-120 V AC / 220-240 V AC ( for AC 50 / 60 Hz.)
D Series:
12 V DC
3.
Current
6 VA
4.
Insulation Class
`F', 155° C.
5.
Insulation resistance
Over 500 M Ohms
6.
Solenoid Temperature Rise
Under 95° C. at 35° C. ambient.
Sr. No.
PARAMETER
DESCRIPTION
1.
Suitable Fluid
Water
2.
Ambient Temp.
45° C. max.
3.
Fluid Temp.
90° C max.
4.
Operating Pressure
G Series:
0.2 bar to 10 bar.
D Series:
600 mm Water column
5.
Inlet Connection
3/4 " BSPM / 1/2" BSPM / 1/4" BSPF depending on model.
6.
Outlet Connection
Varies as per model, See note below each model
7.
Burst Pressure
25 bar minimum.
8.
Water Leakage
G Series:
No leakage from 0.2 bar to 10 bar.
D Series:
No leakage
9.
Water Flow Rate
As required.
10.
Operating Rate
100% @ 30° C. Ambient, 3 Min On/ 5 Min Off @ 45° C Ambient 90° C Water
11.
Life
More than 500,000 cycles.
Note:
All dimensions are in MM, unless specified
Copyright © General Imsubs Pvt. Ltd. All Rights Reserved
