|
Water Feed Inlet Solenoid Valves for Appliances and Automatic
sensor Taps, Flushing systems |
Water
valve (also known as feed / inlet valve) are used
for water inlet in appliances
like washing machines, dish washers, Ice makers,
vending machines, Automatic
Water sensor taps and Faucets
(Auto Taps) etc. for water feeding.
These
are normally closed, pilot operated, diaphragm type
valves. These are used where water flow is required
to be controlled by solenoids.
We also manufacture low pressure, direct
acting, dry armature type valves specifically designed for tea / coffee,
soft drink and beverages vending
machines. Vending machine dispensing solenoid valves
are available in drain vent and non drain vent versions.
If you require
low cost, low pressure
direct acting valve, than we have that too. Please see
our range of low pressure, low cost range of direct
acting valve, these are normally closed, wet armature
type and used for
dispensing cold water / beverages.
Our recent introduction
is direct acting, wet armature type solenoid valves
for domestic RO based water treatment systems. |
|
|
For Appliances
|
For Vending
Machines |
For Domestic
RO System |
Low Pressure Wet Armature
Dispensing |
|
 |
|
 |
 |
|
These type of valves are
available in inline and angled configuration. Options of
standard coil voltages of 6V DC, 12V DC, 24V AC, 24V DC,
30V DC, 36V DC, 48V DC, 110V AC, 230V AC. |
These direct acting, low
pressure valves are available in vented and non vented
version. Standard coil options are 12V DC, 24V DC. Used
in hot beverages dispensing Available in vented and non
vented versions. |
These Direct acting solenoid
valves are available in 2.5 mm and 3 mm orifice and 1/8"
/ 1/4" BSP or NPT connections. Standard coil voltages are
6V DC, 12V DC, 24V DC, 36V DC and 48V DC
|
These direct acting, wet
armature valves are ideal for cold water / beverage
dispensing. They are low cost and available in inline or
angled configuration. |
|
Click for more details |
Click for more details |
Click for more details |
Click for
more details |
|
For Auto
Taps & Faucets |
For WC Flushing Systems |
For Irrigation and garden watering
system |
Very low pressure direct acting, bistable latching |
|
 |
 |
 |
|
|
Latching
solenoid solenoid valves made out of plastics are best
suitable for the applications where power consumption of
coil is major problem. This L series of solenoid valves
is built on G series valve, hence available in wide
range of configurations. |
1" BSP female threaded solenoid
valves specially designed for WC flushing systems are
available in 12 V DC, 24 V AC, 230 V AC and Magnetically
latching coils. Provided with air bleeding screw. |
25 mm (1" BSP) female threaded solenoid
valves designed for irrigation and garden watering systems are
available in 12 V DC, 24 V AC, 230 V AC and Magnetically
latching coils. Provided with air bleeding screw,
flow controller and manual over ride. |
Very useful where fluid
pressure is very low and require bistable latching
operation for battery operated systems. One application
is automatic soap dispensing system. |
|
Click for more details |
Click for more
details |
Click for more
details |
|
|
Common Features |
|
GIPL
water Feed Solenoid Valves are made to meet harsh
tropical demands, Hence, GIPL Water Valves have unmatched
features.
|
|
 Click
here to download PDF catalogue. |
Needs samples?, please check our sampling policy |
|
|
|
