NORMALLY OPEN VALVES - SPECIFICATIONS


PRODUCT CATOGORIES
Specifications General

MOC


FOR MORE INFORMATION CONTACT US : 3711/A,GIDC,PHASE-IV,vatva, Ahmedabad-382445. Phone:+91-79-25842503, +91-79-2584 0845, Email: info@giplindia.com

	Home » Water Valve » NORMALLY OPEN VALVE » Specification For "NO" VALVE » Specification General

	Specifications for NORMALLY OPEN Solenoid Valves

Specifications for normally open solenoid valves for water.

For MOC (Material of construction) click here.

Sr.No	PARAMETER	DESCRIPTION
1.	Connector	Horizontal Spade, 6.3 x 0.8 mm
2.	Electric Rating	12 V DC / 24 V AC / 24 V DC / 36 V DC / 48 V DC / 110-120 V AC / 220-240 V AC (for AC 50 / 60 Hz.)
3.	Current	10 W / 8 VA
4.	Insulation Class	`F', 155° C.
5.	Insulation resistance	Over 500 M Ohms
6.	Solenoid Temperature Rise	Under 95° C. at 35° C. ambient.

Sr. No.	PARAMETER	DESCRIPTION
1.	Suitable Fluid	Water
2.	Ambient Temp.	45° C. max.
3.	Fluid Temp.	90° C max.
4.	Operating Pressure	0.2 to 5 bar
5.	Inlet Connection	Model dependent check here
6.	Outlet Connection	Model dependent check here
7.	Burst Pressure	15 bar minimum.
8.	Water Leakage	No leakage from 0.2 bar to 5 bar
9.	Water Flow Rate	5-30 LPM, Model dependent
10.	Operating Rate	100% @ 30° C. Ambient, 3 Min On/ 5 Min Off @ 45° C Ambient 90° C Water
11.	Life	More than 500,000 cycles.

Note: All dimensions are in MM, unless specified

Copyright © General Imsubs Pvt. Ltd. All Rights Reserved